Announcement

Collapse
No announcement yet.

Rotor looses connectivity with CommCat

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • W8SM
    started a topic Rotor looses connectivity with CommCat

    Rotor looses connectivity with CommCat

    I have a Yaesu G-2800GXA rotor and a Green Heron Engineering RT-21D Controller. I keep loosing connectivity with CommCat. Sometimes I can get it back by shutting off the controller, sometimes shutting off the Great Circle Map, Sometimes I have to shut down CommCat entirely, and sometimes I have to Restart my computer. There is no pattern other than it shuts down quite frequently. Any Ideas?

  • Howard W6HN
    replied
    Time for a diagnostic log. Here is how to proceed.

    Start CommCat and go to File>Settings>Program>Startup>Diagnostics and put a check in the radio logging box...do NOT put a check in Test Mode.

    Restart CommCat

    Use CommCat normally until the rotor connection fails, then exit CommCat and look for rclog.txt in My Documents\COMMSOFT\CommCat\Logs. Please send me a copy via direct email. I will analyze the log and let you know what I find.

    73, Howard W6HN

    Leave a comment:


  • W8SM
    replied
    Yes

    COM port 6

    Leave a comment:


  • Howard W6HN
    replied
    When the connection is dropped, do you still see it listed at the bottom of the Great Circle Map when you point to an appropriate spot? What COM port are you using? We can run a diagnostic log to look for clues if necessary.

    Howard W6HN

    Leave a comment:

Working...
X